中国有色金属学报（英文版）

Select

X38CrMoV5 hot-work tool steel as tool material for thixoforging of steel: Numerical and experimental evaluation

A. RASSILI, J. C. PIERRET, G. VANEETVELD, J. HALLEUX, G. WALMAG, J. LECOMTE-BECKERS

中国有色金属学报（英文版）. 2010, 20(Special 3): 713-718.

摘要 ( )

可视化

Select

Application of semisolid process to Zr-based metallic glass matrix composites

T. Tamura, A. Makaya, K. Miwa

中国有色金属学报（英文版）. 2010, 20(Special 3): 719-722.

摘要 ( )

可视化

Select

Commercial AM60 alloy for semisolid processing:
Effects of continuous rheoconversion process on microstructure

XINGBo(邢博),LIYuan-dong(李元东),MAYing(马颖),HAOYuan(郝远),D.APELIAN

中国有色金属学报（英文版）. 2010, 20(Special 3): 723-728.

摘要 ( )

可视化

1

Select

Fabrication of AZ31 alloy wire by continuous semisolid extrusion process

GUANRen-guo(管仁国),ZHAOZhan-yong(赵占勇),SUNXiao-ping(孙小平),HUANGHong-qian(黄红乾),DAIChun-guang(戴春光),ZHANGQiu-sheng(张秋生)

中国有色金属学报（英文版）. 2010, 20(Special 3): 729-733.

摘要 ( )

可视化

Select

In situ microtomography investigation of microstructural evolution in Al-Cu alloys during holding in semi-solid state

S.TERZI,L.SALVO,M.SUERY,A.DAHLE,E.BOLLER

中国有色金属学报（英文版）. 2010, 20(Special 3): 734-738.

摘要 ( )

可视化

Select

Microstructure evolution and thixoextrusion of
AZ91D magnesium alloy produced by SSTT

CHENGYuan-sheng(程远胜),CHENQiang(陈强),HUANGZhe-qun(黄哲群),HUANGShu-hai(黄树海)

中国有色金属学报（英文版）. 2010, 20(Special 3): 739-743.

摘要 ( )

可视化

Select

Microstructure of semi-solid ADC12 aluminum alloy adopting
new SIMA method

WANG Zhen-yu(王振宇), JI Ze-sheng(吉泽升), SUN Li-xin(孙丽鑫), XU Hong-yu(许红雨)

中国有色金属学报（英文版）. 2010, 20(Special 3): 744-748.

摘要 ( )

可视化

Select

Microstructure of AZ91D magnesium alloy semi-solid billets prepared by SIMA method from chips

XU Hong-yu(许红雨), JI Ze-sheng(吉泽升), HU Mao-liang(胡茂良), WANG Zhen-yu(王振宇)

中国有色金属学报（英文版）. 2010, 20(Special 3): 749-753.

摘要 ( )

可视化

Select

Microstructure and mechanical properties of rheo-diecasted A390 alloy

ZHAOJun-wen(赵君文),WUShu-sen(吴树森)

中国有色金属学报（英文版）. 2010, 20(Special 3): 754-757.

摘要 ( )

可视化

Select

Effect of semi-solid processing on microstructure and mechanical properties of 5052 aluminum alloy

LüShu-lin(吕书林),WUShu-sen(吴树森),ZHUZe-ming(朱泽明),ANPing(安萍),MAOYou-wu(毛有武)

中国有色金属学报（英文版）. 2010, 20(Special 3): 758-762.

摘要 ( )

可视化

Select

Microstructure and properties of rheo-diecast Al-20Si-2Cu-1Ni-0.4Mg alloy with direct ultrasonic vibration process

WU Shu-sen (吴树森), ZHONG Gu (钟鼓), WAN Li (万里), AN Ping (安萍), MAO You-wu(毛有武)

中国有色金属学报（英文版）. 2010, 20(Special 3): 763-767.

摘要 ( )

可视化

Select

Microstructural evolution of Mg9AlZnY alloy with vibration in
lost foam casting during semi-solid isothermal heat treatment

ZHAO Zhong(赵忠), FAN Zi-tian(樊自田), JIANG Wen-ming(蒋文明), DONG Xuan-pu(董选普)

中国有色金属学报（英文版）. 2010, 20(Special 3): 768-773.

摘要 ( )

可视化

Select

Experimental studies and phase field modeling of microstructure evolution during solidification with electromagnetic stirring

P.GeraldTennyson,P.Kumar,H.Lakshmi,G.Phanikumar,P.Dutta

中国有色金属学报（英文版）. 2010, 20(Special 3): 774-780.

摘要 ( )

可视化

Select

Microstructural characteristics of thixoforged A356 alloy in mushy state

S. TAHAMTAN, A. FADAVI BOOSTANI

中国有色金属学报（英文版）. 2010, 20(Special 3): 781-787.

摘要 ( )

可视化

Select

Synthesis and characterization of 356-SiC_p composites by
stir casting and compocasting methods

S. AMIRKHANLOU, B. NIROUMAND

中国有色金属学报（英文版）. 2010, 20(Special 3): 788-793.

摘要 ( )

可视化

Select

Design of experiments for determination of influence of different
parameters on mechanical properties of semi-solid extruded parts

V. POUVAFAR, S. A. SADOUGH, F. HOSSEINJ, M. R. RAHMANI

中国有色金属学报（英文版）. 2010, 20(Special 3): 794-797.

摘要 ( )

可视化

Select

Mechanical properties of thixo-formed austempered ductile iron

B. HEIDARIAN, M. NLILI-AHMADABADI, M. MORADI

中国有色金属学报（英文版）. 2010, 20(Special 3): 798-804.

摘要 ( )

可视化

1

Select

Characterization on morphology evolution of primary phase in semisolid A356 under slightly electromagnetic stirring

LIUZheng(刘政),MAOWei-min(毛卫民),LIUXiao-mei(刘小梅)

中国有色金属学报（英文版）. 2010, 20(Special 3): 805-810.

摘要 ( )

可视化

Select

Thixotropic compression deformation behavior of SiC_p/AZ61 magnesium matrix composites

YAN Hong (闫洪), WANG Jian-jin(王建金)

中国有色金属学报（英文版）. 2010, 20(Special 3): 811-814.

摘要 ( )

可视化

Select

Microstructure evolution behavior of AlSi9Cu3 alloy during rheocasting

GUO Hong-min(郭洪民), LIU Xu-bo(刘旭波), YANG Xiang-jie(杨湘杰), ZHANG Ai-sheng(章爱生), LIU Yong(刘勇)

中国有色金属学报（英文版）. 2010, 20(Special 3): 815-820.

摘要 ( )

可视化

Select

In-situ observation of crystal detachment behavior in NH₄Cl-H₂O system from chilling metal surface with vibration

ZHANG Ying(张莹), WANG Meng(王猛), DU Li-cheng(杜立成), LIN Xin(林鑫), HUANG Wei-dong(黄卫东)

中国有色金属学报（英文版）. 2010, 20(Special 3): 821-825.

摘要 ( )

可视化

Select

Morphological evolution of non-dendritic microstructure during
solidification under stirring

LINXin(林鑫),TONGLei-lei(统雷雷),ZHAOLi-ning(赵力宁),WANGLi-lin(王理林),WANGMeng(王猛),HUANGWei-dong(黄卫东)

中国有色金属学报（英文版）. 2010, 20(Special 3): 826-831.

摘要 ( )

可视化

Select

Semi-solid rheocasting of grain refined aluminum alloy 7075

U. A. CURLE, G. GOVENDER

中国有色金属学报（英文版）. 2010, 20(Special 3): 832-836.

摘要 ( )

可视化

Select

Influence of surface liquid segregation on corrosion behavior of semi‑solid metal high pressure die cast aluminium alloys

E.P.MASUKU,H.MÖLLER,U.A.CURLE,P.C.PISTORIUS,W.LI

中国有色金属学报（英文版）. 2010, 20(Special 3): 837-841.

摘要 ( )

可视化

Select

Influence of elevated Fe, Ni and Cr levels on tensile properties of
SSM-HPDC Al-Si-Mg alloy F357

H.MöLLER,W.E.STUMPF,P.C.PISTORIUS

中国有色金属学报（英文版）. 2010, 20(Special 3): 842-846.

摘要 ( )

可视化

Select

Characterization of surface liquid segregation in SSM-HPDC aluminium alloys 7075, 2024, 6082 and A201

H.MöLLER,U.A.CURLE,E.P.MASUKU

中国有色金属学报（英文版）. 2010, 20(Special 3): 847-851.

摘要 ( )

可视化

Select

Wear of semi-solid rheocast SiC_p/Al metal matrix composites

U. A. CURLE, L. IVANCHEV

中国有色金属学报（英文版）. 2010, 20(Special 3): 852-856.

摘要 ( )

可视化

Select

Effects of primary phase morphology on mechanical properties of Al-Si-Mg-Fe alloy in semi-solid slurry casting process

R.BURAPA,S.JANUDOM,T.CHUCHEEP,R.CANYOOK,J.WANNASIN

中国有色金属学报（英文版）. 2010, 20(Special 3): 857-861.

摘要 ( )

可视化

Select

Microstructure and mechanical properties of rheo-diecasting AZ91D Mg alloy

YANGLiu-qing(杨柳青),KANGYong-lin(康永林),ZHANGFan(张帆),XUJun(徐骏)

中国有色金属学报（英文版）. 2010, 20(Special 3): 862-867.

摘要 ( )

可视化

Select

Effect of high shear rate on solidification microstructure of
semisolid AZ91D alloy

ZHUGuang-lei(朱光磊),XUJun(徐骏),ZHANGZhi-feng(张志峰),LIUGuo-jun(刘国钧),Z.Fan

中国有色金属学报（英文版）. 2010, 20(Special 3): 868-872.

摘要 ( )

可视化

Select

Effects of annular electromagnetic stirring processing parameters on
semi-solid slurry production

CHEN Xing-run(陈兴润), ZHANG Zhi-feng(张志峰), XU Jun(徐骏)

中国有色金属学报（英文版）. 2010, 20(Special 3): 873-877.

摘要 ( )

可视化

Select

Prediction of shear-related defect locations in semi-solid casting using numerical flow models

F. PINEAU, G. D’AMOURS

中国有色金属学报（英文版）. 2010, 20(Special 3): 878-882.

摘要 ( )

可视化

Select

Rheological behavior of semi-solid Mg₂Si/AM60
magnesium matrix composites at steady state

HUYong(胡勇),HEBo-lin(何柏林),YANHong(闫洪)

中国有色金属学报（英文版）. 2010, 20(Special 3): 883-887.

摘要 ( )

可视化

Select

Numerical simulation and experiment validation of thixoforming angle frame of AZ61 magnesium alloy

JIANGJu-fu(姜巨福),WANGYing(王迎),QUJian-jun(曲建俊),DUZhi-ming(杜之明),LUOShou-jing(罗守靖)

中国有色金属学报（英文版）. 2010, 20(Special 3): 888-892.

摘要 ( )

可视化

Select

Investigation of semi-solid aluminum alloy filling-plastic
flowing in thixoforging

DUZhi-ming(杜之明),LIUJun(柳君),CHENGang(陈刚),QINJin(秦晋),XIEShui-sheng(谢水生)

中国有色金属学报（英文版）. 2010, 20(Special 3): 893-897.

摘要 ( )

可视化

Select

Numerical simulation of solidification of liquid aluminum alloy flowing on cooling slope

N. K. KUND, P. DUTTA

中国有色金属学报（英文版）. 2010, 20(Special 3): 898-905.

摘要 ( )

可视化

Select

Rheological behavior, microstructure and hardness of A356 aluminum alloy in semisolid state using backward extrusion process

S.A.SADOUGH,M.R.RAHMANI,V.POUYAFAR,

中国有色金属学报（英文版）. 2010, 20(Special 3): 906-910.

摘要 ( )

可视化

Select

Treatment of discontinuous interface in liquid-solid forming with extended finite element method

ZHOUJi-ming(周计明),QILe-hua(齐乐华),

中国有色金属学报（英文版）. 2010, 20(Special 3): 911-915.

摘要 ( )

可视化

Select

Characterization of thixoforming process of 100Cr6 steel

K.P.SO&#;EK,A.RASSILI,J.C.PIERRET,G.VANEETVELD

中国有色金属学报（英文版）. 2010, 20(Special 3): 916-920.

摘要 ( )

可视化

Select

Numerical simulation on thixo-co-extrusion of double-layer tube with A356/AZ91D

WANGKai-kun(王开坤),SUNJian-lin(孙建林),MENGHai-feng(孟海峰),DUYan-mei(杜艳梅),WANGXi(王晰)

中国有色金属学报（英文版）. 2010, 20(Special 3): 921-925.

摘要 ( )

可视化

Select

Numerical simulation of a thixocasting process for AISI420 stainless steel air-turbine blade

DAOVan-luu(陶文琉),ZHAOSheng-dun(赵升吨),ZHANGQi(张琦)

中国有色金属学报（英文版）. 2010, 20(Special 3): 926-930.

摘要 ( )

可视化

Select

Simulation of semisolid diecasting process of
four-way valve of HPb59-1 alloy for air-conditioner

YAN Guan-hai(闫观海), ZHAO Sheng-dun(赵升吨), SHA Zheng-hui(沙郑辉)

中国有色金属学报（英文版）. 2010, 20(Special 3): 931-936.

摘要 ( )

可视化

Select

Stability of steel thixoforming process

J. C. PIERRET, A. RASSILI, G. VANEETVELD, J. LE, COMTE-BECKERS

中国有色金属学报（英文版）. 2010, 20(Special 3): 937-942.

摘要 ( )

可视化

Select

Electro-pulse modification and reheating process for production of thixotropic microstructure in AlSi₇Mg alloy

TIANWen-tong(田文彤),ZHANGGuang-an(张广安)

中国有色金属学报（英文版）. 2010, 20(Special 3): 943-947.

摘要 ( )

可视化

Select

Suitability of lost cores in rheocasting process

H. Michels, M. Bünck, A. Bührig-Polaczek

中国有色金属学报（英文版）. 2010, 20(Special 3): 948-953.

摘要 ( )

可视化

Select

Metal flow and die wear in semi-solid forging of steel using coated dies

L.KHIZHNYAKOVA,M.EWERING,G.HIRT,K.BOBZIN,N.BAGCIVAN

中国有色金属学报（英文版）. 2010, 20(Special 3): 954-960.

摘要 ( )

可视化

Select

Induction reheating of A356.2 aluminum alloy and thixocasting as automobile component

H.LAKSHMI,M.C.VINAYKUMAR,RAGHUNATH,P.KUMAR,V.RAMANARAYANAN,K.S.S.MURTHY,P.DUTTA

中国有色金属学报（英文版）. 2010, 20(Special 3): 961-967.

摘要 ( )

可视化

Select

Effects of casting factors of cooling slope on semisolid condition

T.HAGA,R.NAKAMURA,R.TAGO,H.WATARI

中国有色金属学报（英文版）. 2010, 20(Special 3): 968-972.

摘要 ( )

可视化

Select

Reverse design of microstructure and application effectiveness for semi-solid processing of aluminum alloy

YANGYi-tao(杨弋涛),YINXiang-lin(尹湘林),SUNBao-liang(孙保良),ZHANGHeng-hua(张恒华),JINXiao-chun(金晓春),SHAOGuang-jie(邵

中国有色金属学报（英文版）. 2010, 20(Special 3): 973-980.

摘要 ( )

可视化

Select

Semi-solid gravity sand casting using gas induced semi-solid process

T.CHUCHEEP,R.BURAPA,S.JANUDOM,S.WISUTMETHANGOON,J.WANNASIN

中国有色金属学报（英文版）. 2010, 20(Special 3): 981-987.

摘要 ( )

可视化

Select

Preparation of SiC_p/A356 electronic packaging materials and its thixo-forging

WANGKai-kun(王开坤),KANGYong-lin(康永林),SONGPu-guang(宋普光),XUFeng(徐峰),LIXian-hui(黎先辉)

中国有色金属学报（英文版）. 2010, 20(Special 3): 988-992.

摘要 ( )

可视化

Select

Modified rheological processing technology and its applications in iron and steels

XING Shu-ming(邢书明), BAO Pei-wei(鲍培玮), LI Nan(李楠), YAO Shu-qing(姚淑卿)

中国有色金属学报（英文版）. 2010, 20(Special 3): 993-997.

摘要 ( )

可视化

Select

Thixocasting combination spanners using stainless steel X39CrMo17

M.BÜNCK,E.SUBASIC,A.BÜHRIG-POLACZEK,K.JIANG,S.MÜNSTERMANN,J.M.SCHNEIDER,K.FICKERT,H.J

中国有色金属学报（英文版）. 2010, 20(Special 3): 998-1004.

摘要 ( )

可视化

Select

Thixoextrusion of A357 aluminium alloy

A.FORN,G.VANEETVELD,J.C.PIERRET,S.MENARGUES,M.T.BAILE,M.CAMPILLO,A.RASSILI

中国有色金属学报（英文版）. 2010, 20(Special 3): 1005-1009.

摘要 ( )

可视化

Select

Research and development of gas induced semi-solid process for industrial applications

J.WANNASIN,S.JANUDOM,T.RATTANOCHAIKUL,R.CANYOOK,R.BURAPA,T.CHUCHEEP,S.THANABUMRUNGKUL

中国有色金属学报（英文版）. 2010, 20(Special 3): 1010-1015.

摘要 ( )

可视化

Select

Industrial development of gas induced semi-solid process

S.THANABUMRUNGKUL,S.JANUDOM,R.BURAPA,P.DULYAPRAPHANT,J.WANNASIN

中国有色金属学报（英文版）. 2010, 20(Special 3): 1016-1021.

摘要 ( )

可视化

Select

AlTiN and AlTiON-coated hot work tool steels for tooling in steel thixoforming

Y.BIROL,D.ISLER

中国有色金属学报（英文版）. 2010, 20(Special 3): 1022-1028.

摘要 ( )

可视化

Select

SiC nanoparticles reinforced magnesium matrix composites fabricated by
ultrasonic method

WANG Zhao-hui(王朝辉), WANG Xu-dong(王旭东), ZHAO Yu-xin(赵宇昕), DU Wen-bo(杜文博)

中国有色金属学报（英文版）. 2010, 20(Special 3): 1029-1032.

摘要 ( )

可视化

Select

Characteristics of 100Cr6 bearing steel after thixoforming process performed with prototype device

&#;.ROGAL,J.DUTKIEWICZ,T.CZEPPE,J.BONARSKI,B.OLSZOWSKA-SOBIERAJ

中国有色金属学报（英文版）. 2010, 20(Special 3): 1033-1036.

摘要 ( )

可视化

Select

Structure of miniature components from steel produced by
forming in semi-solid state

b.Masek,D.Aisman,M.Behulova,H.Jirkova

中国有色金属学报（英文版）. 2010, 20(Special 3): 1037-1041.

摘要 ( )

可视化

Select

Semi-solid moulding: Competition to cast and machine from forging in making automotive complex components

Q.ZHU,S.P.MIDSON

中国有色金属学报（英文版）. 2010, 20(Special 3): 1042-1047.

摘要 ( )

可视化

1

Select

A review on steel thixoforming

A.RASSILI,H.V.ATKINSON

中国有色金属学报（英文版）. 2010, 20(Special 3): 1048-1054.

摘要 ( )

可视化

选择文件类型/文献管理软件名称

选择包含的内容

2010年, 第20卷, 第Special 3期　刊出日期：2010-12-31

扫码分享

扫码分享

模态框（Modal）标题

选择文件类型/文献管理软件名称

选择包含的内容

2010年, 第20卷, 第Special 3期 刊出日期：2010-12-31

扫码分享

扫码分享

2010年, 第20卷, 第Special 3期　刊出日期：2010-12-31